Tektronix RSA5100A Series Programming Manual page 1207

Examples
TRACe:EVM:MODE
Conditions
Group
Syntax
Arguments
Examples
TRACe:DIQVtime:MODE
Conditions
Group
Syntax
Arguments
RSA6100A Series & RSA5100A Series Programmer Manual
indicates that the Q trace is selected.
1
TRACE:EDIAGRAM:SELECT:Q
Sets or queries whether to display the EVM vs Time trace as vectors or symbols
(points).
Measurement view: EVM vs Time
Trace commands
TRACe:EVM:MODE { VECTors | SYMBols }
VECTors displays the trace in a format that uses lines to connecting points in
the trace display.
SYMBols displays the trace in a format that does not use lines to connect points in
the trace display.
TRACE:EVM:MODE VECTORS
with lines.
Sets or queries whether to display the Demod I&Q vs Time trace as vectors or
symbols (points).
Measurement view: Demod I&Q vs Time
Trace commands
TRACe:DIQVtime:MODE { VECTors | SYMBols }
VECTors displays the trace in a format that uses lines to connecting points in
the trace display.
selects the Q trace in the eye diagram.
sets the display to connect points in the display
Command Descriptions
2-1189