Set Command - Planet GSW-2416SF User Manual

4.4.3

Set command

From the main menu screen
appears.
This set command list contains ten items:
Set port [n]: Please refer to chapter
Set vlan [n]: Please refer to chapter 4.4.3.2.
Set flowcontrol [n] enable/disable: Please refer to
Set vlantag [n] enable/disable: Please refer to
Set vlanaware [n] enable/disable: Please refer to
Set priority [n] [m]: Please refer to
Set pvid [n] [m]: Please refer to
Set vid [n] [m]: Please refer to
Set ip xxx.xxx.xxx.xxx.mmm.mmm.mmm.mmm.ggg.ggg.ggg.ggg: Please refer to
Set pass [oldpass] [newpass]: Please refer to chapter
EM-GSW2416SFv1
(see Figure 4-3), input "set" and press enter. The set command list screen in
Figure 4-17 Set command list screen
4.4.3.1 .
chapter
chapter 4.4.3.4
chapter 4.4.3.5
chapter 4.4.3.6
chapter 4.4.3.7
chapter 4.4.3.8
4.4.3.3.
4.4.3.10
Figure 4-17
chapter 4.4.3.9
- 22 -