Show Command - Planet GSW-2416SF User Manual

set flowcontrol [n]
enable/disable
set vlantag [n]
enable/disable
set vlanaware [n]
enable/disable
set priority [n] [m]
set pvid [n] [m]
set vid [n] [m]
set IP xxx.xxx.xxx.xxx,
mmm. mmm, mmm, mmm,
ggg.ggg.ggg.ggg
set pass [oldpass]
[newpass]
factory default
reboot
logout
Notice:
Only accept command in lowercase letter under console interface.

4.4.2 Show command

From the main menu screen
appears.
This s how command l ist contains el
sho w port : Ple ase refer to
sho w static [n] : Please refer to
show vlan : Please refer to
sho w ip : Please refer to
sho w version : P lease refer to
EM-GSW2416SFv1
Enable/Disable the flow control function to specific port [n] of GSW-2416SF.
Enable/Disable the VLAN Tagging to specific egress port of GSW-2416SF.
Enable/Disable VLAN-Aware function to specific port of GSW-2416SF.
Allow to configure the priority setting of GSW-2416SF.
Assign PVID on each port of GSW-2416SF.
Assign VLAN ID [m] to specific VLAN Group [n]
Assign IP address, subnet mask, gateway of GSW-2416SF.
Change the default password of GSW-2416SF, the maximum length is 8
characters.
Reset the GSW-2416SF to factory default mode.
Reboot the GSW-2416SF.
Logout console interface of GSW-2416SF.
Table 4-1 Detail description of GSW-2416SF available commands
(see Figure 4-3), input "show" and press enter. The show command list screen in
Figure 4-5 Show command list screen
even items:
chap ter 4.4.2.1.
c hapter 4.4.2.2.
chapter 4.4.2.3.
chapter 4.4.2.4.
ch apter 4.4.2.5.
Figure 4-5
- 15 -