Planet GSW-2416SF User Manual page 40

Setup steps
1. VLAN Group
Set VALN Group 1 = default-VLAN with VID (VLAN ID)=1
Add two VLANs – VLAN 2 and VLAN 3
VLAN Group 2 with VID=2
VLAN Group 3 with VID=3
2. Assign VLAN Member :
VLAN 2: Port-1, Port-2 and Port-3
VLAN 3: Port-4, Port-5 and Port-6
VLAN 1: All other ports – Port-7~Port-24
3. Assign PVID for each port:
Port-1, Port-2 and Port-3: PVID=2
Port-4, Port-5 and Port-6: PVID=3
Port-7~Port-24: PVID=1
4. Enable VLAN Tag for specific ports
VLAN Tag Enabled: Port-3 (V
T he Port VLAN configuration would be as the following screen in
EM-GSW2416SFv1
LAN-2) and Port-6 (VLAN-3)
Figure 5-6.
Figure 5-6 Port Configuration Web page screen
- 40 -