Planet GSW-2416SF User Manual page 16

sho w flowcontrol : Plea
sho w vlantag : Pleas
sho w vlanaware : Pl
sho w priority : Pleas
sho w pvid : Please refe
show vid : Please refer to
4.4.2.1 Show port
Display the status on each port of GSW
correct usage is shown
Show port: to view all port status
4.2.2.2 Show static [n]
Display the traffic static on specific port of GSW-2416SF, the content include the following items :
TX OK: Number of transmitted packets.
RX OK: Number of received packets.
TX Error: Number of transmitted packets with error ( CRC error etc).
RX Error: Number of received packets with error (CRC error etc).
Show static [n]: n is the Port ID, n=1-24. To view one specific port static of GSW-2416SF, the port static screen in
4-7 appears.
EM-GSW2416SFv1
se refer to chapter 4.4.2.6
e refer to ch apter 4.4.2.7.
ease refer to chapter 4.4.2.8.
e refer to chapter 4.4.2.9 .
r to chapt er 4.4.2.10.
chapter 4.4.2.11 .
-2416SF, this command allows you to view the port st
as below:
of GSW-2416SF. The screen in
Figure 4-6 All port Status screen
.
Figure 4-6 appears.
atus of the Switch and the
Figure
- 16 -