Vlan Setup; Vlan Group And Member Settings - Planet GSW-2416SF User Manual

5. 3 VLAN Setup
A V irtual LAN (VLAN) is a logical network groupi
so only members of the VLAN receive traffic from the same
logically eq uivalent of reconnecting a group of network devices to another Layer 2 switch. However, all the network dev
are still plug into the same
The GSW-2416SF switch s
support is "disable".
5.3.1 VLAN Group an m
Thi s section provid es current status and member setting of each VLAN group
appears.
1.
Enter VLAN ID for the selected VLAN group. There are maximum 24 VLAN groups to provide configured and the
range for the VLAN ID is 1-4095; 0 res
2.
Checked the Member box to select the memb
3.
Afte r setup completed, please press "Apply" to take affect.
4.
To setup another VLAN Group, click the VLAN Group ID button. After the web page load completed, repeat the
previous steps.
5.
To remove a port from specific VLAN group, just cancel the Member check Box and press "Apply" to take affect.
Notice:
Change VLAN settings for every time, you have to reboot the switch to apply new settings.
EM-GSW2416SFv1
ng that limits the broadcast domain. It allows you to isolate network traffic
swi tch physically.
up po rts Port-Base VLAN setting in web management page.
d ember settings
Figure 5-4 GSW-2416SF VLAN Settings Web Page screen
erved for management purpose.
ers for the VLAN group.
VLAN members. Basically, creating a VLAN from a switch is
In the default configuration, VLAN
of GSW-2416SF, the screen in
ices
Figure 5-4
- 38 -