Planet GSW-2416SF User Manual page 26

Notice:
Change VLAN settings for every time, you have to reboot the switch to apply new settings.
4.4.3.6 Set priority
This command configures the default 802.1p port priority assigned for untagged packets for a specific port of
GSW-2416SF. The correct usage is shown as below:
Set priority [n] [m]
[n]=1-24, n is the specific Port ID of GSW-2416SF.
[m] = 0-7, m is 802.1p priority.
Default Setting: 0
The per port priority setting screen in
EM-GSW2416SFv1
Figure 4-22 VLAN aware Configuration screen
Figure 4-23 appears. (Set Port 1 with priority "7")
Figure 4-23 Priority Configuration screen
- 26 -