Planet GSW-2416SF User Manual page 44

Notice:
1. After turn on the port trunk feature, port 1 and port 2 or port 17,18,19,20 should connect to another switch,
such as another GSW-2416SF, that also supports port trunk feature to double the bandwidth in between.
Otherwise, if the connected switch do not support port trunk, it will cause network loop and hangs the w
network.
2. The GSW-2416SF doesn't support LACP (Link Aggregation control Protocol) trunk type yet. Connect with
LACP type switch the trunk function might be failed.
3.
Within the same Trunk Group, the member ports have to be configured with the same settings, such as port speed and
VLAN etc.
EM-GSW2416SFv1
hole
- 44 -