HIKVISION DS-2DP1636Z-D User Manual page 97

3. Configure the rule area:
Click on the tool bar of the live view panel. Click the mouse on the live view panel. Right
click the mouse to finish drawing.
4. Set the duration from 1to 100.
5. Enable rules: Check the Enable checkbox of each rule in the rule list to enable the rule.
6. Click
Region Entrance
Purpose:
This function can be used for detecting people, vehicles and objects entering the pre-defined
region. The alarm will be triggered if the rule is broken.
Steps:
1. Create new rule: Click
2. Select rule type: Click the dropdown list and select Region Entrance as the rule type.
3. Configure the rule area:
Click on the tool bar of the live view panel. Click the mouse on the live view panel. Right
click the mouse to finish drawing.
User Manual of PanoVu Series Network Camera
Figure 6-35 Draw Area
to save the settings.
to add a new rule.
Figure 6-36 Select Rule Type
90