HIKVISION DS-2DP1636Z-D User Manual page 84

77
User Manual of PanoVu Series Network Camera
Figure 6-15 VCA Configuration (Camera 2 and Camera 3)
The setting of VCA configuration can be divided into three modes.
 Behavior Analysis Configuration
For the configuration of behavior analysis, refer to the flowchart below.
Select Behavior Analysis as VCA Resource.
Set Overlay & Capture.
Set Zoom Ratio.
Set parameters in VCA > Advanced
Configuration.
Set scene parameters and rules in VCA > Scene
Configuration.
Set Arming Schedule, Alarm Linkage and Scene
Auto-switch (optional) of the scene.
Save the settings.
Figure 6-16 Flowchart of Configuring Behavior Analysis
 Behavior Analysis & Face Capture Configuration
For the configuration of behavior analysis & face capture, refer to the flowchart below.