Auxiliary Functions - HIKVISION DS-2DP1636Z-D User Manual

Zoom
Focus
Iris
Adjust Speed
Preset
Patrol
Pattern
Note:
PTZ functions, including PTZ control, preset, patrol, and pattern are only supported by camera 1.

Auxiliary Functions

The auxiliary functions include light, wiper, auxiliary focus, lens initialization, manual tracking, 3D
positioning, one-touch patrol, and one-touch park.
The Auxiliary functions panel is shown in the figure below:
Descriptions of Icons on PTZ Control Panel are listed below:
Light Supplement
Wiper
Auxiliary Focus
Manual Tracking
3D Positioning
User Manual of PanoVu Series Network Camera
Click , the lens zooms in, click
Click , the lens focus far and the items far away gets clear. Click
lens focus near and the items nearby gets clear.
When the image is too dark, click
bright, click
Adjust speed of pan/tilt movements.
Refer to 4.1.1 for detailed information of setting preset.
Refer to 4.1.2 for detailed information of setting patrol.
Refer to 4.1.3 for detailed information of setting pattern.
Figure 3-5 Auxiliary Functions
Click to enable/disable the light supplement of the camera. This function is reserved.
Click to move the wiper once.
The auxiliary focus function is reserved.
Before you start:
Enter the Smart Tracking settings interface and enable smart tracking first.
Configuration > PTZ > Smart Tracking
Steps:
1. Click on the toolbar of live view interface.
2. Click a moving object in the live video. The camera will track the object automatically.
Steps:
1. Click on the toolbar of live view interface.
2. Operate the 3D positioning function:

Left click a position of the live video. The corresponding position will be moved to the
, and the lens zooms out.
to open the iris. When the image is too
to close the iris.
29
, the