HIKVISION DS-2DP1636Z-D User Manual page 112

Note:
You can click
to expand the device table and hide the network parameter panel on the right side, or click
to show the network parameter panel.
 Modify network parameters
Steps:
1. Select the device to be modified in the device list and the network parameters of the device will be
displayed in the Modify Network Parameters panel on the right side.
2. Edit the modifiable network parameters, e.g. IP address and port number.
3. Enter the password of the admin account of the device in the Password field and click
save the changes.
 For your privacy and to better protect your system against security risks, we strongly recommend
the use of strong passwords for all functions and network devices. The password should be
something of your own choosing (Using a minimum of 8 characters, including at least three of
the following categories: upper case letters, lower case letters, numbers, and special characters.)
in order to increase the security of your product.
 Proper configuration of all passwords and other security settings is the responsibility of the
installer and/or end-user.
User Manual of PanoVu Series Network Camera
or on each column heading to order the information; you can click
Figure A.1.2 Modify Network Parameters
105
to