Configuring Email Settings - HIKVISION DS-2DP1636Z-D User Manual

Upload type: To enable uploading the captured picture to the FTP server.

3. Click
Note:
If you want to upload the captured pictures to FTP server, you also have to enable the continuous
snapshot or event-triggered snapshot in Snapshot interface. For detailed information, refer to the
Section 5.1.4 Configuring Capture Schedule.

Configuring Email Settings

Purpose:
The system can be configured to send an Email notification to all designated receivers if an alarm event
is detected, e.g., motion detection event, video loss, video tampering, etc.
Before you start:
Configure the DNS Server settings under Configuration > Network > Basic Settings > TCP/IP before using
the Email function.
Steps:
1. Enter the Email settings interface:
Configuration> Network > Advanced Settings > Email
2. Configure the following settings:
Sender: The name of the email sender.
Sender's Address: The email address of the sender.
SMTP Server: The SMTP Server IP address or host name (e.g., smtp.263xmail.com).
User Manual of PanoVu Series Network Camera
Figure 2-11 Child Directory
to save the settings.
Figure 2-12 Email Settings
20