4. While enter this grade of menu, the cursor is pointing to the first channel
alarm configuration, the ex-work default state of it is N/A(Off). Now we take
the configuration of the 1
as an example. The preset positions must be configured well within the range
of 001-064 in advance, so that they can be used for the configuration of
alarm.
A. Press [FOCUS+] button to open the alarm configuration, the ―N/A‖
changes to ―001‖, it means the first channel alarm has been on, alarm point is
st
the 1
preset position.
B. If there is a need to configure any preset position among 001-064, just
press [FOCUS+] to increase or [FOCUS-] to decrease.
C. The configuring method for other channels are the same as the 1
ALARM SETUP
→ALARM1 CALL PRESET:N/A
ALARM2 CALL PRESET:N/A
ALARM3 CALL PRESET:N/A
ALARM4 CALL PRESET: N/A
IRIS+: RETURN
st
channel alarm [ALARM1 CALL PRESET: N/A]
ALARM SETUP
→ALARM1 CALL PRESET:001
ALARM2 CALL PRESET:N/A
ALARM3 CALL PRESET:N/A
ALARM4 CALL PRESET: N/A
IRIS+: RETURN
- 60 -
IRIS-: EXIT
IRIS-: EXIT
st
one.