Dahua IR High Speed Dome Camera User Manual page 55

2. Move the cursor to [AUTO-RUN] by operating the joystick upwards and
downwards, press [FOCUS+] button to enter the lower menu of
[AUTO-RUN]. Move the cursor to [TOUR], press [FOCUS+] button and show
the menu as:
3. Configuration of Tour Number: Move the cursor to [SERIAL NO.] by
operating the joystick upwards, press [FOCUS+] button to enter the serial
number configuration. Press [FOCUS+] button to increase, press [FOCUS-]
button to decrease. The optional range is 001—004, choose 001 as the
present tour serial number, all below operation is based on this tour number.
AUTO-RUN
1 PRESET POSITION
2 AUTO SCAN
→3 TOUR
IRIS+: SAVE IRIS-: EXIT
TOUR
→1 SERIAL NO. 001
2 SETUP
3 PREVIEW
4 DELETE
IRIS+: SAVE IRIS-: EXIT
- 54 -