Dahua IR High Speed Dome Camera User Manual page 57

method to add all the preset positions of the tour as well as the corresponding
dwelling time. After configuring, press [IRIS+] button to save and return. Now,
the first tour route has been configured successfully, using the same method,
you can configure the other tour routes.
6. Start running the tour: move the cursor to [PREVIEW] by operating the
joystick, press [FOCUS+] button, you will exit the menu firstly, then the IR
High Speed Dome Camera starts to run the tour.
7. Delete the configuration of the tour: move the cursor to [DELETE] by
operating the joystick, press [FOCUS+] button, when a ―☆‖sign appears in
front of [DELETE], it means the present tour has been deleted.
8. Press [IRIS+] button to save and return
9. Press [IRIS-] button to exit menu
7.5.4 Pattern scan configuration
Description of the function: Pattern scan has record space 99, time can be
different with different routes, the total time is about 4 minutes. The recording
route can be configured freely (including the movement of the Pan/tilt, and
the zoom ratio of the camera lens). Totally 4 Pattern Scan routes can be
configured.
1. Press 95+PREVIEW button to enter the Main Menu.
MAIN MENU
1 SYSTEM INFO
2 CAMERA SETUP
→3 AUTO-RUN
4 LANGUAGE ENGLISH
IRIS-: EXIT
- 56 -