Dahua IR High Speed Dome Camera User Manual page 20

above-drawn positions, and drive in the special M6 screws;
C Push the power cable, communication cable and video cable through the
bracket tube, then push the installing port on the top of the outer housing of
the unit into the installing hole of the bracket, tighten the 3 M6 screws and fix
well. Make sure the M6 screws just fit in the screw slot of the installing port of
the housing;
D Put the power adaptor into some installing box, fix the adaptor well lest it
slides out.
Attention: The adaptor equiped can only be placed indoor or in water-proof
box or other water-proof spaces, it can not be placed directly outdoor,
otherwise water may seep in and damage the adaptor
E Pull the power cable, video cable and controlling cable out through the
cable slot of the bracket, leaving long enough cables for connection;
F Fix the bracket firmly on the ceiling with three M6 screw nuts and
washers.
- 19 -