Dahua IR High Speed Dome Camera User Manual page 52

☆ Small tips
Preset position function is to save the Horizontal angle, the tilt angle as well
as the Focus Length etc parameter in the IR High Speed Dome Camera,
when necessary, promptly invoke these parameters, the Pan/Tilt and the
Lens can automatically adjust to this position.
6. Invoke preset position: move the cursor to [PREVIEW], Press [FOCUS+]
button, when a ―☆‖ sign appears in front of [PREVIEW], it means the
present preset position is already invoked. Screen shows the present preset
position.
7. Delete present preset position: move the cursor to [DELETE], Press
[FOCUS+] button, when a ―☆‖ sign appears in front of [DELETE], it means
the present preset position is already deleted.
8. Compile present preset position's title: move the cursor to [COMPILE
TITLE], press [FOCUS+] button for 2 times to enter preset position's title
compiling configuration.
Attention: COMPILE TITLE is on the lower menu of the PRESET POSITION,
you can choose it by operating the joystick upwards and downwards, for the
title compiling operation, please refer to SPEEDDOME title compiling
operation.
9. If there is need to delete the configuration of preset position's title, move
the cursor to [DELETE], press [FOCUS+] button, you can delete the content
of the configuration.
10. Press [IRIS+] button to save and return.
11. Press [IRIS-] button to exit menu.
Attention: 1. When carrying out Configuration, Invoke, Delete preset
position operations, preset position number must be chosen firstly. 2. The
present preset position refers to the preset position with the corresponding
number in the present SERIAL NO. option.
- 51 -