Dahua IR High Speed Dome Camera User Manual page 42

4. There are 5 configuration options under [PAN/TILT SETUP]: AUTOFLIP,
PROPORTION P/T, IDLE TIME, IDLEACTIVATE, IR TRIGGER functions.
5. AUTOFLIP
[AUTOFLIP] is in the lower menu of [PAN/TILT SETUP]. Operate the joystick
to move the cursor to [AUTOFLIP] option, press [FOCUS+] key to enter
[AUTOFLIP] configuration function, there is ON/OFF switchable, press
[FOCUS+] key to choose, ON means to activate [AUTOFLIP] function, OFF
means to idle the [AUTOFLIP] function.
☆Small tips
If the [AUTOFLIP] function is activated, in the process of operating the
joystick to trace and monitor, if the user move the lens to the bottom(vertical)
then continues pressing the joystick, the lens will automatically flip 180º
horizontally, then the user can still control it to move upwards till 90° , which
enables the user to directly observe the situation on the back side, thus tilt
180° consecutive monitoring can be realized.
6. PROPORTION P/T
Operate the joystick to move the cursor to [PROPORTION P/T] option. Press
[FOCUS+] to enter [PROPORTION P/T] function configuration. The
configuration switches between ON and OFF, When ON is chosen, it means
that Speed Matching Function is opened. Well, OFF means closed. Press
PAN/TILT SETUP
→1 AUTOFLIP
2 PROPORTION P/T
3 IDLE TIME
4 IDLEACTIVATE
IRIS+: RETURN IRIS-: EXIT
- 41 -
ON
ON
000
OFF