Dahua IR High Speed Dome Camera User Manual page 56

4. Preset position staying time configuration: move the cursor to [SETUP],
press [FOCUS+] button to enter the tour preset position and staying time
configuration. 16 preset positions can be included in each tour group, the
range of the preset positions is 001—128, the range of dwelling time is
000—255 seconds.
5. Tour route configuration: we take the 1
st
positions), the 1
example:
A: move the cursor to the first group in the tour configuration area [01. 000
000......16. 000 000], among them, 01-16 means the quantity of the preset
positions in the tour is 16, which can not be changed;
B: Operate the joystick left or right to move the cursor to the first configuration
zone ―000‖ (preset position). Press [FOCUS+] button to increase, press
[FOCUS-] button to decrease, the range is 001-128, for example, we can set
the preset position as ―001‖;
C: Then operate the joystick left or right to move the cursor to the second
configuration zone ―000‖ (dwelling time), press [FOCUS+] button to increase,
press [FOCUS-] button to decrease, the range is 000-255sec, set the time as
―003‖, now one preset position has been added to the tour;
D: After the adding of one preset position, operate the joystick to right and
move the cursor to the next configuration point for configuring, use the same
TOUR NO.
PRESET TIME PRESET TIME
01.→000 000;
03. 000 000;
05. 000 000;
IRIS+: SAVE
preset position with the dwelling time of 3 seconds as an
- 55 -
001
02 . 000 000
04 . 000 000
06 . 000 000
IRIS-: EXIT
st
tour group (1 group has 16 preset