Dahua IR High Speed Dome Camera User Manual
  1. Manuals
  2. Brands
  3. Dahua Manuals
  4. Security Camera
  5. IR High Speed Dome Camera
  6. User manual
Dahua IR High Speed Dome Camera User Manual

Dahua IR High Speed Dome Camera User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IR High Speed Dome Camera
User's Manual
●
●
Please read the manual carefully before installing and using the unit.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IR High Speed Dome Camera and is the answer not in the manual?

Questions and answers

Related Manuals for Dahua IR High Speed Dome Camera

Summary of Contents for Dahua IR High Speed Dome Camera

  • Page 1 IR High Speed Dome Camera User’s Manual ● ● Please read the manual carefully before installing and using the unit.

  • Page 2: Table Of Contents

    5.1 Outer shape and dimension of the unit----------------------------------13 5.2 Preparation for the installation --------------------------------------------13 5.3 Installation of Wall-mount IR High Speed Dome Camera-----------14 5.4 Installation of Pendant-mount IR High Speed Dome Camera-----18 5.5 Connection of the cables for alarm in and out -------------------------21 VI.

  • Page 3: Important Safeguards

    Important Safeguards 1. During the course of transportation and storage, the product should be avoided from incorrect operations such as heavy pressing, strong vibration, soaking etc, which may cause damage to the unit. 2. The product is designed for wall-mount and pendant-mount installation, it can not be installed upside-down.

  • Page 4: Introduction

    At the same time, the unit has multi intelligent functions such as: left & right scan, pattern scan, tour, Privacy Mask, alarm function etc. The IR lamp of the IR High Speed Dome Camera adopts the latest LED Array technology, LED Array has higher brightness, longer visible distance, more evenly distributed light field and much longer lifespan, with which the night-vision effect is greatly improved.

  • Page 5: Technical Data

    II. Technical Data Power Supply DC15V(4A) (The adaptor should be connected within 2 meters from the IR High-speed Dome) Working temperature －30° C～+60° C Relative Humidity 10-90% Power Consumption Communication PELCO_D / PELCO_P / PELCO_D1 Protocol Communication Method RS485 bus cable Communication 1200/2400/4800/9600bps Baudrate...
  • Page 6 Vertical angle free to be set, 3 grades of speed 360° Scan (low, medium and high) optional Tour Group 4 groups, 16 preset positions for 1 tour group, dwelling time at each preset position can be set Pattern Scan number Privacy Mask Zone...

  • Page 7: Characteristics

    III. Characteristics  The cover is constructed with aluminum alloy, which ensures compact structure, high shielding strength and excellent heat-dispersion effect. The lower part of the unit is designed as exposed, which effectively solve the heat-dispersion problem for the camera module and the IR lamps etc parts.
  • Page 8  Day&night IR-sensible camera module equiped inside. In the daytime, it is in color mode, the image is vivid; at night, it turns to Black&white mode, the image is crisp. Thus, all day long (24hours) monitoring is realized.  Adopting full-functional high-performance DSP design, performance stable ...

  • Page 9: Description Of Functions

    IV. Description of Functions 1. IR Lamp The latest LED Array technology is adopted for this IR High Speed Dome Camera. LED Array is highly integration of traditional LED. Comparing with traditional LED, it has some advantages as below. A. Higher brightness: Since LED Array is integration of LED, the brightness and the viewing distance are greatly increased.
  • Page 10 conveniently configured and carried out through the OSD menu. These functions include: Preset Positions, Tours, Pattern Scan, Left & Right Scan, Privacy Mask, Alarm, Language Choosing, and the configuration of the parameters of the Camera Module etc. The user can also edit the title of the IR High-speed Dome Cameras and the preset positions through multiple Input Modes, so that the titles are easier to be remembered and identified.
  • Page 11 7. Automatic Tours The automatic tour function is a built-in function of the IR High-speed Dome Camera. Through beforehand programming, the user can arrange the preset positions into the automatic tour in the desired order. When it’s needed to run the tour, operating through the OSD menu, the user can make the IR High-speed Dome Camera automatically move as per the order of the preset positions configured in the tour with preset time intervals.
  • Page 12 13. Idle Time Function Users can set the function that is to be carried out in idle time as the Idle Time Function. If the user exit the OSD menu after finishing with other operations, and if the IR High-speed Dome Camera is in still state without running, then after a period of time during which nobody operates the unit, the unit will automatically begin to carry out Idle Time Function that is configured in advance.
  • Page 13 of time is configured for auto-focus resuming, once there is no controlling order received, after the period of time, the IR High-speed Dome Camera will resume auto-focus. Under the following circumstances, the camera module can not carry out auto-focus: ● When the object is not in the center of the view. ●...

  • Page 14: Installation And Connection Of Ir High-Speed Dome Camera

    Dome Camera 5.1 The outer shape and dimension of IR High Speed Dome Camera: The outer shape and dimension of IR High Speed Dome Camera 5.2 Preparation for installation 1. Installation should be carried out by professional personnels as per relative regulations lest there is any problem.

  • Page 15: Installation Of Wall-Mount Ir High Speed Dome Camera

    4. Before leaving the factory, the unit has been tested well for installation, users can install directly. 5. Before installation, please read carefully the instruction of installation in the User’s Manual enclosed with the unit. 5.3 Installation of Wall-mount IR High-speed Dome Camera Attention: The wall for the selected installation location must be firm without peeling.
  • Page 16 B. Use an electrical drill to make four holes for M6 screws on the above-drawn positions, and drive in the expansion M6 screws; C．Fix the installation board of the bracket firmly on the wall with four M6 screw nuts and washers. D.
  • Page 17 Attention: The adaptor equiped can only be placed indoor or in water-proof box or other water-proof spaces, it can not be placed directly outdoor, otherwise water may seep in and damage the adaptor. F. Put up the wall bracket assembled with IR High-speed dome on the ancillary hooks: Pull the power cable, video cable and controlling cable out through the wire-out-going hole of the bracket, then put the assembled on the two corresponding pegs on the installed peg-board, then push the bracket...
  • Page 18 5.3.2 Connection of Exterior Cables Cable Application Connecting Objects Remarks power supply for High-speed Inner positive, outer Power cable the unit dome--- negative power supply adaptor 485 cable Controlling the IR IR High-speed dome Green (Positive), High-speed --- controlling device white(Negative) Dome Video Cable...

  • Page 19: Installation Of Pendant-Mount Ir High Speed Dome Camera

    control. 5.3.3 Switch on Power a Make sure the polarity of plugs, sockets and the connection of cables is correct, then switch on power b The IR High-speed Dome Camera begins to do the self-check: it moves pan 360° , tilt 90° , then moves to its original position, then zooms in and zooms out once.
  • Page 20 above-drawn positions, and drive in the special M6 screws; C Push the power cable, communication cable and video cable through the bracket tube, then push the installing port on the top of the outer housing of the unit into the installing hole of the bracket, tighten the 3 M6 screws and fix well.
  • Page 21 5.4.2 Connection of Exterior Cables Cable Application Connecting Objects Remarks power supply for High-speed Inner positive, outer Power cable the unit dome--- negative power supply adaptor 485 cable Controlling the IR IR High-speed dome Green (Positive), High-speed --- controlling device white(Negative) Dome Video Cable...

  • Page 22: Connection Of The Cables For Alarm In And Out

    correct: A: RS485 positive, B: RS485 negative. If wrongly connected, the IR High-speed Dome Camera will be out of ◆ control. 5.4.3 Switch on Power a Make sure the polarity of plugs, sockets and the connection of cables is correct, then switch on power b The IR High-speed Dome Camera begins to do the self-check: it moves pan 360°...
  • Page 23 Attention: a. Alarm input must be ON/OFF input signal, any other types of input signal(such as power voltage etc) is possible to damage the unit. When there are alarm signals from multi channels, the unit will respond to them one by one, the interval is 3 seconds. b.
  • Page 24 5.5.2 sketch for Parallel Connection Alarm input (with Constant-open detector) 5.5.3 sketch for Alarm output connection - 23 -...

  • Page 25: Configuration Of The System

    VI. Configuration of the system Before power on, please confirm if the protocol, the Baud rate of the controlling system and the address code of the IR High-speed dome camera is right (the factory default is: Pelco_D for protocol, 4800bps for baudrate, 001 for address code).

  • Page 26: Configuration Of Baudrate

    6.2 Configuration of Baud Rate DIP-3 and DIP-4 of the 4-button switch on the PCB board is used to configure Baudrate of communication, the default configuration is 4800BPS. Following table shows states of coding switches and cosrresponding Baudrate. Baudrate 1200 BPS 2400 BPS 4800 BPS 9600 BPS...
  • Page 27 87654321 87654321 87654321 00000001 00100000 00111111 00000010 00100001 01000000 00000011 00100010 01000001 00000100 00100011 01000010 00000101 00100100 01000011 00000110 00100101 01000100 00000111 00100110 01000101 00001000 00100111 01000110 00001001 00101000 01000111 00001010 00101001 01001000 00001011 00101010 01001001 00001100 00101011 01001010 00001101 00101100 01001011 00001110...
  • Page 28 87654321 87654321 87654321 01100000 01111111 10011110 01100001 10000000 10011111 01100010 10000001 10100000 01100011 10000010 10100001 01100100 10000011 10100010 01100101 10000100 10100011 01100110 10000101 10100100 01100111 10000110 10100101 01101000 10000111 10100110 01101001 10001000 10100111 01101010 10001001 10101000 01101011 10001010 10101001 01101100 10001011 10101010 01101101...
  • Page 29 87654321 87654321 87654321 10111111 11010110 11101101 11000000 11010111 11101110 11000001 11011000 11101111 11000010 11011001 11110000 11000011 11011010 11110001 11000100 11011011 11110010 11000101 11011100 11110011 11000110 11011101 11110100 11000111 11011110 11110101 11001000 11011111 11110110 11001001 11100000 11110111 11001010 11100001 11111000 11001011 11100010 11111001 11001100...

  • Page 30: Configuration And Operations Through The Osd Menu

    Configuration and Operations through the OSD Menu 7.1 Basic Operation 7.1.1 Power on and self-check of the IR High Speed Dome Camera Once power on, the unit enters self-checking procedure. The unit pans slowly to the default horizontal 180° postion, then tilt to 20° . The lens zoom from far to near, then from near to far.
  • Page 31 No.1 for twice within 5 seconds. All the configuration with the menu has to be through Main Menu. ⑵ The Main Menu will be exited when press ―IRIS-‖. 7.1.3 Corresponding functions of the keys and joystick of the keyboard. [IRIS+](CLOSE) It means ―Enlarge Iris‖...

  • Page 32: Table For All Configuration And Operations Through Osd Menu

    7.2 Table for all Configuration and Operations through OSD Menu 1. EDIT In English interface, titles SPEEDDOME can be editted with 4 input TITLE modes 1. SPEEDDOME TITLE To choose which items of 2. TITLE 2. PRESET TITLE the informations are to be DISPLAY SETUP shown on the screen 3.
  • Page 33 MODE Maximum 128 Preset 1. SERIAL NO. Positions 2. SETUP To set the preset position 1. PRESET To invoke the preset POSITION 3. PREVIEW position 4. DELETE 5. EDIT TITLE High, medium, low 3 levels 1. SPEED speed optional 2. LEFT LIMIT 2.

  • Page 34: Configure The Information Of The System

    4. DELETE 7.3 Configure the Information of the System 7.3.1 Compile the title of the IR High Speed Dome Camera When multiple IR High-speed Dome Cameras are used in the system, in order to more easily identify the IR High-speed Dome Cameras, SPEEDDOME title configuration function can be used.
  • Page 35 SYSTEM INFO →1 EDIT SPEEDDOME TITLE 2 TITLE DISPLAY SETUP 3 PAN/TILT SETUP 4 CLEAR THE SETUP IRIS+: RETURN IRIS-: EXIT 3. Operate the joystick and move the cursor to [1 EDIT SPEEDDOME TITLE], press [FOCUS+] to enter ―SPEEDDOME Title Compiling‖ state, now the cursor is at [TITLE: ] position.
  • Page 36 EDIT SPEEDDOME TITLE → TITLE: ABC Input: ABCDEFGHI IRIS+: SAVE IRIS-: EXIT Attention: 1) There are 4 Input Modes: ABC, abc, DIGIT and SIGN. When the cursor is moved to ―ABC input‖, press [FOCUS+] to confirm the Input Mode, then corresponding character is shown.
  • Page 37 the default configuration. Now there is not any character behind the ―Title‖, now you can compile the title. EDIT SPEEDDOME TITLE → TITLE: ABC Input: ABCDEFGHI IRIS+: SAVE IRIS-: EXIT 2. Choose DIGIT input mode: A: Move the joystick downwards and move the cursor to ―DIGIT‖, press [FOCUS+] to choose Input Mode;...
  • Page 38 EDIT SPEEDDOME TITLE Title: 1 DIGIT: 0→123456789 IRIS+: SAVE IRIS-: EXIT 3. Letter and sign Input Mode: A: After the digit is input well, move the cursor upwards to Input Mode Optional Area, press [FOCUS+] key to Choose Capital Letter, Small Letter and Sign Input Modes in turn.(The operation process is the same as Digit input.) Add ―Aa!”...
  • Page 39 MAIN MENU →1 SYSTEM INFO 2 CAMERA SETUP 3 AUTO-RUN 4 LANGUAGE ENGLISH IRIS-: EXIT 2. Operate the joystick upwards or downwards to move the cursor to [SYSTEM INFO], press [FOCUS+] to enter next grade menu as: SYSTEM INFO 1 EDIT SPEEDDOME TITLE →2 TITLE DISPLAY SETUP 3 PAN/TILT SETUP 4 CLEAR THE SETUP...
  • Page 40 7. Press [IRIS-] to exit the menu without saving. Following the moving of the IR High Speed Dome Camera, the information on the screen changes accordingly. From the screen, users can see some current information of the IR High Speed Dome Camera including: Horizontal and Vertical Angle, the SPEEDDOME Title, the Preset Position’s Title.
  • Page 41 MAIN MENU →1 SYSTEM INFO 2 CAMERA SETUP 3 AUTO-RUN 4 LANGUAGE ENGLISH IRIS-: EXIT 2. Operate the joystick upwards or downwards to move the cursor to [SYSTEM INFO], press [FOCUS+] to enter next grade menu. SYSTEM INFO 1 EDIT SPEEDDOME TITLE 2 TITLE DISPLAY SETUP →3 PAN/TILT SETUP 4 CLEAR THE SETUP...
  • Page 42 PAN/TILT SETUP →1 AUTOFLIP 2 PROPORTION P/T 3 IDLE TIME 4 IDLEACTIVATE IRIS+: RETURN IRIS-: EXIT 4. There are 5 configuration options under [PAN/TILT SETUP]: AUTOFLIP, PROPORTION P/T, IDLE TIME, IDLEACTIVATE, IR TRIGGER functions. 5. AUTOFLIP [AUTOFLIP] is in the lower menu of [PAN/TILT SETUP]. Operate the joystick to move the cursor to [AUTOFLIP] option, press [FOCUS+] key to enter [AUTOFLIP] configuration function, there is ON/OFF switchable, press [FOCUS+] key to choose, ON means to activate [AUTOFLIP] function, OFF...
  • Page 43 When manually adjusting, if the focus length is far, due to the high sensitivity of the IR High Speed Dome Camera, the image will move very quickly even if the joystick is slightly touched, which may cause the lost of image; when the Focus Length is near, the image may trembles.
  • Page 44 (Attention: when configuring this function, firstly, [Auto] option should be chosen for [B&W/COLOR MODE] in [Camera Setup]. When the camera module turns to Black&White mode, the IR lamp will be turned on. B. If [PHOTOSENSE] is chosen, the IR lamps are controlled by the Photosensitive Resistor, when the illumination is too low to be sensed by the Photosensitive Resistor, the IR lamps will be turned on.

  • Page 45: Configure The Parameter Of The Camera Module

    3. Operate the joystick upwards or downwards to move the cursor to [CLEAR THE SETUP], press [FOCUS+] key to enter the lower grade menu under the CLEAR THE SETUP interface. CLEAR THE SETUP →1 CLR ALL PRE-POSITION 2 CLR ALL TOUR IRIS+: RETURN IRIS-: EXIT 4.
  • Page 46 MAIN MENU 1 SYSTEM INFO →2 CAMERA SETUP 3 AUTO-RUN 4 LANGUAGE ENGLISH IRIS-: EXIT 2. Operate the joystick upwards or downwards to move the cursor to [CAMERA SETUP], press [FOCUS+] to enter the lower grade menu: CAMERA SETUP →1 DIGITAL ZOOM ON 2 BLC MODE ON 3 B&W/COLOR MODE IRIS+: RETURN...
  • Page 47 If the Digital Zooming is set as closed, the maximum zooming times of the camera lens is just the optical zooming times. 7.4.2 Back Light Compensation Mode 1. Press 95+PREVIEW to enter the Main Menu. MAIN MENU 1 SYSTEM INFO →2 CAMERA SETUP 3 AUTO-RUN 4 LANGUAGE...
  • Page 48 ☆ Small Tip Strong backlight makes the back-lighted object have shadow, the Backlight Compensation Function enables the camera to automatically adjust the Iris to match the changing of the light, automatically adjust the brightness of the Main Object to make the image clearly displayed. Attention: This function is related to the type and parameter of the inside camera module.
  • Page 49 CAMERA SETUP 1 DIGITAL ZOOM ON 2 BLC MODE ON →3 B&W/COLOR MODE IRIS+: RETURN IRIS-: EXIT 3. Operate the joystick to move the cursor to [B&W/COLOR MODE] option, press [FOCUS+] to enter. There are 3 options: ★[Auto] Auto Color/B&W converting mode, the camera will automatically convert according to the illumination;...

  • Page 50: Configuration Of The Auto Running

    Attention: This function is related to the type and parameter of the inside camera module, since there is such function with the camera module, this function in the menu is valid. 7.5 Configuration of Auto Running 7.5.1 Preset Position Configuration 1.
  • Page 51 PRESET POSITION →1 SERIAL NO. 2 SETUP 3 PREVIEW 4 DELETE IRIS+: SAVE IRIS-: EXIT 4. Set Preset Position Number: Operate the joystick to move the cursor to [SERIAL NO.], press [FOCUS+] to enter Serial Number configuration. Press [FOCUS+] to increase the number, press [FOCUS-] to decrease the number. The optional range is 001—128.
  • Page 52 ☆ Small tips Preset position function is to save the Horizontal angle, the tilt angle as well as the Focus Length etc parameter in the IR High Speed Dome Camera, when necessary, promptly invoke these parameters, the Pan/Tilt and the Lens can automatically adjust to this position.
  • Page 53 7.5.2 Left/right scan 1. Press 95+PREVIEW button to enter the Main Menu MAIN MENU 1 SYSTEM INFO →2 CAMERA SETUP 3 AUTO-RUN 4 LANGUAGE ENGLISH IRIS-: EXIT 2. Move the cursor to [AUTO-RUN] by operate the joystick upwards and downwards, press [FOCUS+] button to enter the lower menu of [AUTO-RUN].
  • Page 54 front of [LEFT LIMIT], it means the configuration can be carried out. Operate the joystick to choose the object image, press [FOCUS+] button to save. 5. Configuration of right limiting position: move the cursor to [RIGHT LIMIT] by operating the joystick, press [FOCUS+] button, when a ―☆‖sign appears in front of [RIGHT LIMIT], it means the configuration can be carried out.
  • Page 55 2. Move the cursor to [AUTO-RUN] by operating the joystick upwards and downwards, press [FOCUS+] button to enter the lower menu of [AUTO-RUN]. Move the cursor to [TOUR], press [FOCUS+] button and show the menu as: AUTO-RUN 1 PRESET POSITION 2 AUTO SCAN →3 TOUR IRIS+: SAVE IRIS-: EXIT...
  • Page 56 TOUR NO. PRESET TIME PRESET TIME 01.→000 000; 02 . 000 000 03. 000 000; 04 . 000 000 05. 000 000; 06 . 000 000 IRIS+: SAVE IRIS-: EXIT 4. Preset position staying time configuration: move the cursor to [SETUP], press [FOCUS+] button to enter the tour preset position and staying time configuration.
  • Page 57 method to add all the preset positions of the tour as well as the corresponding dwelling time. After configuring, press [IRIS+] button to save and return. Now, the first tour route has been configured successfully, using the same method, you can configure the other tour routes. 6.
  • Page 58 2. Move the cursor to [AUTO-RUN] by operate the joystick upwards and downwards, press [FOCUS+] button to enter the lower menu of [AUTO-RUN]. Move the cursor to [PATTERN SCAN], press [FOCUS+] button and show the menu as: AUTO-RUN 1 PRESET POSITION 2 AUTO SCAN 3 TOUR →4 PATTERN SCAN...

  • Page 59: Configuration Of Language

    [RECORD]. 6. Invoke the configuration: move the cursor down to [PREVIEW], press [FOCUS+] button to run the Pattern scan. 7. Delete the configuration: enter the pattern scan configuration menu, move the cursor down to [DELETE], press [FOCUS+] button and a ―☆‖sign will appear, which means the present recorded content has been deleted.

  • Page 60: Configuration Of Alarm Function

    MAIN MENU 1 SYSTEM INFO 2 CAMERA SETUP 3 AUTO-RUN →4 LANGUAGE ENGLISH IRIS-: EXIT 2. In the Main Menu, there is an item as: [LANGUAGE ENGLISH] 3. Press [IRIS-] button to exit menu. 7.7 Configuration of Alarm function 1. Press 95+PREVIEW button to enter the Main Menu. ALARM CONFIGURATION is on the second page of the MAIN MENU.
  • Page 61 ALARM SETUP →ALARM1 CALL PRESET:N/A ALARM2 CALL PRESET:N/A ALARM3 CALL PRESET:N/A ALARM4 CALL PRESET: N/A IRIS+: RETURN IRIS-: EXIT 4. While enter this grade of menu, the cursor is pointing to the first channel alarm configuration, the ex-work default state of it is N/A(Off). Now we take the configuration of the 1 channel alarm [ALARM1 CALL PRESET: N/A] as an example.

  • Page 62: Configuration Of Privacy Mask Function

    When external alarm signal is transmitted to the IR High Speed Dome Camera, the IR High Speed Dome Camera will turn to the alarm spot to shoot, and directly show on the screen what happens at the alarm spot.
  • Page 63 1. Press 95+PREVIEW button to enter the Main Menu. MAIN MENU MAIN MENU 1 SYSTEM INFO →5 ALARM SETUP 2 CAMERA SETUP 6 PRIVACY MASK 3 AUTO-RUN →4.LANGUAGE ENGLISH IRIS-: EXIT IRIS-: EXIT 2. Operate the joystick upwards and downwards to move the cursor to [PRIVACY MASK], press [FOCUS+] button to enter the lower menu: PRIVACY MASK →1PRIVACY ZONE NO...

  • Page 64: Brightness Control Of The Ir Lamps

    B. Press [FOCUS+] button, then operate the joystick to adjust the size of the shield zone, operate the joystick upwards to decrease the height, downwards to increase the height, right to decrease the width and left to increase the width. C.
  • Page 65 ----- within 30m, short-distance monitoring object (zooming times of the camera module is about X1~X3), the unit will turn on IR lamps for low brightness, so that the brightness is appropriate, the object is neither too dark nor too bright for monitoring. ----- 30m~60m, medium-distance monitoring object (zooming times of the camera module is about X4~X8), the unit will turn on IR lamps for medium brightness to meet the requirement of the brightness for medium distance...

  • Page 66: Configuration And Operation Of The Functions Directly Through The Keyboard

    VIII. Configuration and operation of the functions directly through the keyboard. Notice: For this IR High Speed Dome Camera with OSD menu, almost all the functions of the pan/tilt and the inside camera module can be realized through the OSD menu (for detailed operation, please refer to the...
  • Page 67 Invoke Invoke ―preset Keyboard operation ―preset Keyboard operation meaning position‖ meaning position‖ Set left limiting position Enter OSD menu Set right limiting Activate Alarm function position Start Left & right scan Idle Alarm function (low speed) Start Left & right scan Default state restoration (resetting) (medium speed) Start Left &...
  • Page 68 dealers for necessary information. If preset position numbers larger than 128 could not be invoked on the controlling device, please choose PELCO-D1 protocol, functions operation table as below: Invoke Invoke ―preset Keyboard operation ―preset Keyboard operation meaning position‖ meaning position‖ Set left limiting position Enter OSD menu Set right limiting...

  • Page 69: Viv. Simple Trouble Shooting Table

    VIII. Simple Trouble Shooting Table Problems Possible causes Remedies Wrong connection of power cables Correct action, Power supply adaptor damaged Replace picture, no indicator on when power is Fuse damaged Replace switched on. Bad power cable connection Correct Address or Baud rate configuration Configure again Normal self-check...
  • Page 70 distance far, Thicken the controlling cable attenuation of 485 signal is too much The driving power of the 485 Replace with converter with converter is not sufficient separate power supply - 69 -...

Table of Contents