Dimm Module Population Sequence - Supermicro X11SPL-F User Manual

DIMM Module Population Sequence

When installing memory modules, the DIMM slots should be populated in the following order:
DIMMA1, DIMMD1, DIMMB1, DIMME1, DIMMC1, DIMMF1, DIMMA2, DIMMD2.
•
The blue slots must be populated first.
•
Only populate DIMMA2 and DIMMD2 if the extra memory support is needed.
•
Always use DDR4 DIMM modules of the same type, size and speed.
•
Mixed DIMM speeds can be installed. However, all DIMMs will run at the speed of the
slowest DIMM.
•
The motherboard will support odd-numbered modules (1 or 3 modules installed). However,
to achieve the best memory performance, a balanced memory population is recommended.
ASpeed
AST2500
LEDBMC
SP1
USB2/3
USB4/5
JBT1
JIPMB1
I-SGPIO2
I-SATA2
I-SATA3
I-SATA4
I-SATA5
I-SATA6
I-SATA7
JSD1
MH10
MH11
BT1
Intel
C621
M.2 PCI-E 3.0 X4
LE3
LEDPWR
DIMMC1
DIMMB1
DIMMA1
DIMMA2
33
VGA
LAN2 LAN1
JLAN2 JLAN1
CPU
BAR CODE
MAC CODE
IPMI CODE
FAN3
JF1
DIMMD2
DIMMD1
DIMME1
Chapter 2: Installation
COM1
IPMI_LAN
USB0/1
DIMMF1