Supermicro X11SPL-F User Manual page 49

TPM/Port 80 Header
A Trusted Platform Module (TPM)/Port 80 header is located at JTPM1 to provide TPM support
and Port 80 connection. Use this header to enhance system performance and data security.
Refer to the table below for pin definitions. Please go to the following link for more information
on the TPM: http://www.supermicro.com/manuals/other/TPM.pdf.
M.2 Slot
M.2 is formerly known as Next Generation Form Factor (NGFF). The M.2 slot is designed for
internal mounting devices. The X11SPL-F motherboard deploys an M key dedicated for SSD
devices with the ulitmate performance capability in a PCI-Express 3.0 x4 interface for native
PCI-E SSD support. It can also support SATA devices.
ASpeed
AST2500
LEDBMC
SP1
USB2/3
USB4/5
JBT1
JIPMB1
I-SGPIO2
I-SATA2
Intel
C621
I-SATA3
I-SATA4
M.2 PCI-E 3.0 X4
I-SATA5
I-SATA6
LE3
I-SATA7
JSD1
Trusted Platform Module Header
Pin Definitions
Pin# Definition
1 +3.3V
3 RESET#
5 SPI_CLK
7 SPI_MOSI
9 +3.3V Stdby
VGA
LAN2 LAN1
JLAN2
MH10
MH11
BT1
2
BAR CODE
MAC CODE
IPMI CODE
1
FAN3
LEDPWR
JF1
49
Pin# Definition
2 SPI_CS#
4 SPI_MISO
6 GND
8
10 SPI_IRQ#
1. TPM Header
COM1
2. M.2 Slot
IPMI_LAN
JLAN1
USB0/1
CPU
Chapter 2: Installation