Supermicro X11SPL-F User Manual page 15

Peripheral Devices
•
Two (2) USB 2.0 ports on the rear I/O panel (USB0/1)
•
Two (2) USB 3.0 ports on the rear I/O panel (USB8/9)
•
Three (3) front accessible USB 2.0 headers with two (2) USB connections (USB2/3, USB4/5, USB6/7)
•
One (1) front accessible USB 3.0 header with two (2 ) USB connections (USB10/11)
•
One (1) USB 3.0 Type-A header (USB12)
BIOS
•
256Mb AMI BIOS SPI Flash ROM
®
•
ACPI 6.0, Plug and Play (PnP), BIOS rescue hot-key, SPI dual/quad speed support, riser card auto detection support,
real time clock (RTC) wakeup, and SMBIOS 3.0 or later
Power Management
•
ACPI power management
•
Power button override mechanism
•
Power-on mode for AC power recovery
•
Wake-On LAN
•
Power supply monitoring
System Health Monitoring
•
Onboard voltage monitoring for +1.8V, +3.3V, +5V, +/-12V, +3.3V stdby, +5V stdby, VBAT, HT, memory, PCH temperature,
system temperature, and memory temperature
•
5 CPU switch phase voltage regulator
•
CPU thermal trip support
•
Platform Environment Configuration Interface (PECI)/TSI
Fan Control
•
Fan status monitoring via IPMI connections
•
Single cooling zone
•
Low-noise fan speed control
•
Seven (7) 4-pin fan headers
System Management
•
Trusted Platform Module (TPM) support
•
SuperDoctor® 5
•
Redundant power supply unit detection sensor
•
Chassis intrusion header and detection
•
Server Platform Service
LED Indicators
•
CPU/system overheat LED
•
Power/suspend-state indicator LED
•
Fan failed LED
•
UID/remote UID
•
HDD activity LED
•
LAN activity LED
Note: The table above is continued on the next page.
Motherboard Features
15
Chapter 1: Introduction