Motherboard Features - Supermicro X11SPL-F User Manual

X11SPL-F User's Manual

Motherboard Features

CPU
•
Supports an Intel® Xeon 81xx/61xx/51xx/41xx/31xx series (Socket P0-LGA 3647) processor with up to 28 cores and a
thermal design power (TDP) of up to 165W
Note: The X11SPL-F motherboard does not support FPGA or Fabric processors.
Memory
•
Up to 256GB of RDIMM, 512GB of LRDIMM, and 1TB of 3DS LRDIMM DDR4 (288-pin) ECC memory with speeds of up
to 2666MHz in eight memory slots
Note: Memory speed support depends on the processors used in the system.
DIMM Size
•
Up to 128GB at 1.2V
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
•
Intel PCH C621
Expansion Slots
•
One (1) PCI-Express 3.0 x4 (in x8) Slot (PCH SLOT1)
•
Four (4) PCI-Express 3.0 x8 Slots (CPU SLOT2, SLOT3, SLOT5, SLOT7)
•
Two (2) PCI-Express 3.0 x8 (in x16) Slot (CPU SLOT4, SLOT6)
Network
•
Intel Ethernet Controller i210 + i210 for Dual 1G Base-T Ports
•
One (1) Dedicated IPMI LAN located on the rear I/O panel
Baseboard Management Controller (BMC)
•
ASpeed AST2500 BMC
Graphics
•
Graphics controller via ASpeed AST2500 BMC
I/O Devices
•
Serial (COM) Port
•
SATA 3.0
•
Video (VGA) Port
Note: The table above is continued on the next page.
Motherboard Features
•
One (1) serial port on the rear I/O panel (COM1)
•
One (1) front accessible serial port header (COM2)
•
Eight (8) SATA 3.0 ports at 6Gb/s (I-SATA0 ~ I-SATA7 with RAID 0, 1, 5, 10)
•
One (1) VGA connection on the rear I/O panel
14