Supermicro X11SPL-F User Manual page 58

X11SPL-F User's Manual
ME Manufacturing Mode
Close pins 2-3 of jumper JPME2 to bypass SPI flash security and force the system to operate
in the manufacturing mode, which will allow the user to flash the system firmware from a
host server for system setting modifications. Refer to the table below for jumper settings.
The default setting is Normal.
LAN1/LAN2 Enable/Disable
Jumpers JPL1 and JPL2 enables or disables LAN ports 1 and 2 on the motherboard. See
the table below for jumper settings. The default setting is enabled.
ASpeed
AST2500
LEDBMC
SP1
USB2/3
USB4/5
JBT1
JIPMB1
I-SGPIO2
I-SATA2
Intel
C621
I-SATA3
I-SATA4
I-SATA5
I-SATA6
I-SATA7
1
JSD1
Manufacturing Mode
Jumper Settings
Jumper Setting Definition
Pins 1-2 Normal
Pins 2-3 Manufacturing Mode
LAN Enable
Jumper Settings
Jumper Setting Definition
Pins 1-2 Enabled (default)
Piins 2-3 Disabled
3
2 VGA
LAN2
JLAN2
MH10
MH11
BT1
BAR CODE
MAC CODE
IPMI CODE
M.2 PCI-E 3.0 X4
LE3
FAN3
LEDPWR
JF1
COM1
LAN1
IPMI_LAN
JLAN1
USB0/1
CPU
58
1. Manufacturing Mode
2. LAN1 Enable
3. LAN2 Enable