Dimm Installation; Dimm Removal - Supermicro X11SPL-F User Manual

X11SPL-F User's Manual

DIMM Installation

1. Insert the desired number of DIMMs into
the memory slots in the following order:
DIMMA1, DIMMD1, DIMMB1, DIMME1,
DIMMC1, DIMMF1, DIMMA2, DIMMD2.
For the best performance, please use the
memory modules of the same type and
speed.
2. Push the release tabs outwards on both
ends of the DIMM slot to unlock it.
3. Align the key of the DIMM module with the
receptive point on the memory slot.
4. Align the notches on both ends of the
module against the receptive points on the
ends of the slot.
5. Press the notches on both ends of the
module straight down into the slot until the
module snaps into place.
6. Press the release tabs to the lock positions
to secure the DIMM module into the slot.

DIMM Removal

Press both release tabs on the ends of the
DIMM module to unlock it. Once the DIMM
module is loosened, remove it from the
memory slot.
ASpeed
AST2500
LEDBMC
MH10
SP1
USB2/3
MH11
USB4/5
JBT1
JIPMB1
I-SGPIO2
I-SATA2
Intel
C621
I-SATA3
I-SATA4
M.2 PCI-E 3.0 X4
I-SATA5
I-SATA6
LE3
I-SATA7
JSD1
Release Tabs
Press both notches
straight down into
the memory slot.
34
COM1
VGA
LAN2 LAN1
IPMI_LAN
JLAN2 JLAN1
USB0/1
CPU
BT1
BAR CODE
MAC CODE
IPMI CODE
FAN3
LEDPWR
JF1
Notches