Dimm Module Population Sequence - Supermicro X10SDE-DF User Manual

X10SDE-DF User Manual
RDIMM
RDIMM
RDIMM
RDIMM

DIMM Module Population Sequence

When installing memory modules, the DIMM slots must be populated in the following order:
P1-DIMMA1, P1-DIMMB1, P1-DIMMA2, P1-DIMMB2, then P2-DIMMA1, P2-DIMMB1, P2-
DIMMA2, P2-DIMMB2. The blue slots must be populated first.
DIMMB2
DIMMB1 (Blue Slot)
DIMMA2
DIMMA1 (Blue Slot)
Note: Be sure to use memory modules of the same type and speed on the motherboard.
Mixing of memory modules of different types and speeds is not allowed.
Memory Module Population
Max Memory 4GB DRAM
Possible Technology
Single Rank 16GB
UDIMM (4x 4GB DIMMs)
Dual Rank 32GB
UDIMMs (4x 8GB DIMMs)
DIMM Capacity
Ranks Per
(GB)
DIMM and
Type
Data
Width
4Gb
SRx4 8GB
SRx8 4GB
DRx8 8GB
DRx4 16GB
Towards the CPU
Towards the edge of the motherboard
8GB DRAM
Technology
32GB
(4x 8GB DIMMs)
64GB
(4x 16GB DIMMs)
Speed (MT/s); Voltage
(V); Slot Per Channel
(SPC) and DIMM Per
Channel (DPC)
2 Slots Per Channel
1DPC 2DPC
8Gb
1.2V 1.2V
2133 2400
16GB
8GB 2133 2400
16GB 2133 2400
32GB 2133 2400
22