Emerson Rosemount 0065 Quick Start Manual page 2

Quick Start Guide
NOTICE
This guide provides basic guidelines for Rosemount 0065 and 0185 Sensor models. It does not provide
instructions for configuration, diagnostics, maintenance, service, troubleshooting, Explosion-proof,
Flameproof, or intrinsically safe (I.S.) installations.
If the Rosemount 0065 or 0185 Sensor was ordered assembled to a temperature transmitter, see the
appropriate Quick Start Guide for information on configuration and hazardous locations certifications.
WARNING
Explosions could result in death or serious injury.
Installation of this transmitter in an explosive environment must be in accordance with the appropriate local,
national, and international standards, codes, and practices.
Conduit/cable entries

Unless marked, the conduit/cable entries in the transmitter housing use a
marked "M20" are M20
same thread form. Only use plugs, adapters, glands, or conduit with a compatible thread form when closing
these entries.
Contents
Wiring diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Sensor assembly dimensions . . . . . . . . . . . . . . . 5
2
1.5 thread form. On devices with multiple conduit entries, all entries will have the
1
/
2
Product certifications . . . . . . . . . . . . . . . . . . . . . 8
August 2017
–14 NPT thread form. Entries