Pm200 Specific Scpi Command Reference - THORLABS PM200 Operation Manual

4.4.2.3 PM200 specific SCPI Command Reference

See also SCPI
www.scpiconsortium.org . All commands with a 'SCPI' checkmark are described
in the SCPI specification.
All described commands work also with the PM100D, PM100A and PM100USB
instruments (with some limitations due to the hardware capabilities).
4.4.2.3.1 SYSTem subsystem commands
Command
SYSTem
:BEEPer
[:IMMediate]
:STATe {ON|1|OFF|0}
:STATe?
:ERRor
[:NEXT]?
:VERSion?
:DATE <year>,<month>,<day>
:DATE?
:TIME <hour>,<min>,<sec>
:TIME?
:LFRequency <numeric value>
:LFRequency?
:SENSor
:IDN?
© 2012 Thorlabs
Specification, Version
Path to SYSTem subsystem. (SCPI Vol.2 §21)
Issue an audible signal. (SCPI Vol.2 §21.2.2)
Activate/deactivate the beeper. (SCPI Vol.2 §21.2.3)
Return the state of the the beeper (SCPI Vol.2 §21.2.3)
Returns the latest <error code, "message">. (SCPI Vol.2 §21.8.8)
Query level of SCPI standard (1999.0) . (SCPI Vol.2 §21.21)
Sets the instrument's calendar. (SCPI Vol.2 §21.7)
Query the instrument's calendar. (SCPI Vol.2 §21.7)
Sets the instrument's clock. (SCPI Vol.2 §21.19)
Query the instrument's clock. (SCPI Vol.2 §21.19)
Sets the instrument's line frequency setting to 50 or 60Hz. (SCPI Vol.2
§21.13)
Query the instrument's line frequency setting. (SCPI Vol.2 §21.13)
Query information about the connected sensor. This is a query only
command. The response consists of the following fields: <
sn cal_msg
< >,<
<name>
<sn>
<cal_msg>
<type>
<subtype>
<flags>
Flag:
Is power sensor
Is energy sensor
Response settable
Wavelength settable
Tau settable
Has temperature sensor
1999.0,
Description
type subtype
>,< >,<
Sensor name in string response format
Sensor serial number in string response format
calibration message in string response format
Sensor type in NR1 format
Sensor subtype in NR1 format
Sensor flags as bitmap in NR1 format.
Dec.value:
1
2
16
32
64
256
4 Computer Interface
May, 1999, http://
name
>,
flags
>,< >
51