Instrument Settings - Interacoustics AT235 Additional Information

AT235 Additional Information

3.8 Instrument Settings

Hold the Setup button while rotating the wheel until Instrument Settings is selected.
By rotating the wheel, the following settings can be selected and changed.
AUD key. When pressing the
A
enter a new license key for the audiometry module. The new license key is activated by pressing
the
is not a valid key.
IMP key. When pressing the
B
enter a new license key for the impedance module. The new license key is activated by pressing
the
is not a valid key.
The Display light can be altered by holding the
C
You will see the brightness of your screen change accordingly.
The LED light can be altered by holding the
D
will see the brightness of the LEDs around the Enter button change accordingly. Note that the LED
in the probe system cannot be adjusted.
E
Keep Session on Save will keep the session on the device when pressing save session.
By pressing the
F
the date and time.
button. However, the previous license key cannot be changed if the new key
button. However, the previous license key cannot be changed if the new key
button when Date and time is selected, you can manually adapt
button, a pop up window opens in which you can
button, a pop up window opens in which you can
button and rotating the wheel.
button and rotating the wheel. You
Page 30