Manage Protocol Settings - Interacoustics AT235 Additional Information

AT235 Additional Information

3.7 Manage Protocol Settings

Hold the Setup button until, by rotating the wheel, Manage protocols is selected. A window pops up
showing currently available protocols on your instrument. By default, all custom made protocols are
displayed at the top of the list and all factory default protocols are displayed at the bottom of the list.
The following buttons are available when the Manage Protocols window is open.
Pressing Delete removes the protocol permanently from the instrument. You will
be asked to confirm this action. The delete function is not available for factory
default protocols.
The Hide and Unhide buttons allow you to organize which protocols are on view
when pressing the Tests button in order to alter the protocols
By holding the Region button and rotating the wheel you can choose which
default factory protocols are to be selected.
Pressing Back closes the Manage Protocols window.
Page 29