General Filter Hints - Pitco Frialator SF14 UFM Installation & Operation Manual

Return Valve
pump on, allows the shortening to return to the design, this sooop is used to remove the debris
fryer tank. from the filter pan.
Drain Valve BLACK - Drain the oil from the Cleaner - Used during fryer boil-out cleaning.
fryer tanks to the filter pan.
oil from the filter unit to the fryer. Simply push
to left OD fitting to connect. Pull to right to
disa>nnect.
Filter Unit Cord - Provides electrical power to
the illter unit.
FUter
Package
Paper
FIlter Crumb Catch - Mounts in d1e filter pan lid
and catches large debris during filtering.
flush Hose (OPl10NAL) - Attached to the
filter piping, this hose and nozzle is used to flush
out the fryer tank. This hose is an optional item.
At operating temperature the shortening temperature may be greater than
300°F. Extreme care should be used when filtering operating temperature
shortening to avoid personal injury
2.4.1 General FDter Hints
Ensure that all oil in the filter pan is returned
important if you are using solid shortening.
Always
use Pitco Precoad for fastest filtrations, maximum labor saving, and cleanest/
clearest shortening possible. Impaired filter performance will result without the use of
a filter aid.
The longevity of your oil is related to how clean you keep it. With a Pitco solo filter
system, it is easy to do a quick drain/refill anytime. By removing suspended particles
often, it prevents them from burning.
Preooat FUter AId
.
Coarse Diatomaceous earth
used to enhance the filter ability of the filter
media.
Cleaning Bnlsh -This long handled stiff bristle
brush is used to brush down the crumbs inside the
fryer tank during shortening filtering. of pre-cut filter
FryerCmmb
Scoop -Aspecia11y
designed long
handle scoop for scooping out the fryer. The
scoop section is narrow enough to fit down be-
tween the fryer burner tubes.
~;=I
This is very
2-5