Pitco 20 Installation And Operation Manual page 4

SAFETY
The fryer may be equipped with an oil proof, electrical supply cord with a
three prong safety plug. This is to protect operators from electrical shock
hazard in the event of an equipment malfunction. DO NOT cut or remove the
grounding (third) prong from this plug.
There is an open flame inside the fryer. The unit may get hot enough to set
near by materials on fire. Keep the area around the fryer free from combus-
tibles.
NEVER supply the fryer with a gas that is not indicated on the data plate.
Using the incorrect gas type will cause improper operation. If you need to
convert the fryer to another type of fuel, contact your dealer.
Wait 5 minutes before attempting to relight the pilot to allow for any gas in
the fryer to dissipate.
Never melt blocks of shortening on top of the burner tubes. This will cause
a fire, and void your warranty.
Water and shortening DO NOT mix. Keep liquids away from hot shortening.
Dropping liquid frozen food into the hot shortening will cause violent boiling.
At operating temperature the shortening temperature will be greater than
300°F. Do not attempt to move the appliance when the oil is at operating
temperature. The hot oil WILL cause injury to you when it comes in contact
with your skin.
SAFETY
SAFETY
DO NOT use an open flame to check for gas leaks!
SAFETY
SAFETY
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
SAFETY
SAFETY
SAFETY
SAFETY
SAFETY