Adding A Demo To A Workspace - Renesas RX110 Application Note

RX Family ADC Module Using Firmware Integration Technology
5.7

Adding a Demo to a Workspace

Demo projects are found in the FITDemos subdirectory of the e 2 studio installation directory. To add a demo project to
a workspace, select File>Import>General>Existing Projects into Workspace, then click "Next". From the Import
Projects dialog, choose the "Select archive file" radio button. "Browse" to the demo subdirectory, select the desired
demo zip file, then click "Finish".
R01AN1666EJ0220 Rev. 2.20 Page 73 of 74
Dec 01, 2016