Installing the device in a rack or cabinet
4.
Attach the front right bracket to the rail rack using two 10-32 x 5/8 in. screws and the appropriate round-hole or square-hole
retainer nuts. Refer to the following figure.
FIGURE 14 Installing the Brocade ICX 6650 in a 2-post rack
5.
Repeat step 3 to attach the left front bracket to the left front rack rail and tighten all 10-32 x 5/8 in. screws to a torque of 25 in-
lb (29 cm-kg).
Proceed to
Attaching a PC or terminal
4-post rack mount installation
Kits for 4-post rack mounting are not included in the shipping carton and must be ordered separately.
NOTE
Use the following procedure when installing the Brocade ICX 6650 in a 4-post rack cabinet. For 2-post cabinets, follow the
procedures in
2-post rack mount installation
30
on page 33.
on page 28.
Brocade ICX 6650 Hardware Installation Guide
Part Number: 53-1003621-04