Introduction; Models And Specifications; Cylinder Assembly; Product Side Pressure Rating - SPX Votator II Instruction Manual

Waukesha Cherry-Burrell

Introduction

Models and Specifications

Cylinder Assembly

Product Side Pressure
Rating

Jacket Pressure Rating

Machine Serial Number

MODEL
HE100-003a
Figure 1 - Machine Serial Number
Location
11/2012
The Votator II can be furnished for horizontal or vertical
installation, available in the following models:
Model
6 x 84
6 x 72
6 x 48
6 x 36
6 x 24
This manual covers the Horizontal and Vertical Votator II,
Concentric and Eccentric Designs, and the Extra Heavy Duty
Votator II. Every attempt has been made to note where special
considerations are needed for each model. These differences are
primarily in the installation and maintenance of the units.
The cylinder assembly consists of a rotating shaft inside of two
tubes. The outer tube is called the jacket, and contains working
fluid to heat or cool the contents of the inner, product tube. The
product tube provides a heat exchange surface for the product.
Standard product tubes are one of the following:
• Pure nickel with a hard chrome plated interior surface.
• Stainless steel with a hard chrome plated interior surface.
• Stainless steel with no plating.
• 400 psi (28 bar) @ 400°F (204°C) - Oval Tube
• 600 psi (42 bar) @ 400°F (204°C) - Std. Votator II
• 800 psi (56 bar) @ 400°F (204°C) - U Stamp Votator II
• 250 psi (17.5 bar) @ 400°F (204°C)
• 150 psi (10.5 bar) @ 400°F (204°C) (oval and high efficiency
tubes)
Check the data plate attached to the Votator cylinder for exact
specifications of the unit.
The machine serial number is stamped on a serial number
nameplate located on the machine side as shown in Figure 1. On
vertical units (not shown), the nameplate is on the cylinder.
Include the machine model and serial number with each parts
order.
®
Votator
SERIAL NO.
www.spx.com
95-03057
Heat Transfer Area
2 2
Steam/Liquid Refrigeration
11 ft (1.0 m )
2 2
Steam/Liquid Refrigeration
9 ft (0.84 m )
2 2
Steam/Liquid Refrigeration
6 ft (0.56 m )
2 2
Steam/Liquid Refrigeration
4.2 ft (0.39 m )
2 2
Steam/Liquid Refrigeration
3.0 ft (0.28 m )
Introduction
Jacket Type
Page 7