Votator Ii Media Configurations; Special Considerations For Vertical Votator Ii - SPX Votator II Instruction Manual

Introduction
Votator II Media
Configurations
Special Considerations for
Vertical Votator II
Page 8
Waukesha Cherry-Burrell
The Votator II is available in the following configurations:
• BWS-BRINE/WATER/STEAM For liquid and steam heating
and cooling applications.
• LIQUID For water or glycol.
• VAPOR For steam or refrigeration.
The Vertical Votator II cylinder assembly is shipped for on-site
installation on the mounting pole. When receiving the shipment,
check for the following or multiples of (depending on the order)
shipped separately in their own crate or crates:
• Scraped Surface Heat Exchanger.
• Frame poles (including attached hydraulic cylinder) with
hydraulic pump & reservoir assembly(s).
• Accumulators, Refrigeration Valves and Piping, if furnished.
• Mount plates, nuts & bolts, and interconnecting product
piping.
95-03057 11/2012