Figure 2-11. Fan Wire Connectors - HP 330 Service Information Manual

Fans
Preliminary Requirements
1. Turn the unit off.
2. Remove the power cord.
3. Remove the front panel.
Procedures
1. Using needlenose pliers, disconnect the fan wire connector from its pins on the mother-
board. Refer to Figure 2-11.
Voltage Test
Points
Fan Wire
Connectors
LED Wire
Connector
Figure 2-11. Fan Wire Connectors
2. For the large fan, slide the power-on LED/bracket toward the front and bend the wires
aside.
3. Remove one of mounting screws from the fan to be replaced. Refer to Figure 2-12.
44 Assembly Replacement