HP 350 Installation Manual
Cloud-managed access point wall mount kit
Hide thumbs
Also See for 350:
- Installation manual (101 pages) ,
- Service information manual (198 pages) ,
- Service handbook (94 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for HP 350
Summary of Contents for HP 350
- Page 1 HP 350 Cloud-Managed Access Point Wall Mount Kit Installation Guide...
-
Page 2: Package Contents
Documentation Description The HP 350 Wall Mount Kit securely mounts the HP 350 to flat surfaces, such as a wall or ceiling, and is also compatible with single and dual gang wall boxes. HP 350 AP Wall Mount Kit | Installation Guide... -
Page 3: Installation
Installation Complete the following steps to install your access point using the HP 350 AP Wall Mount Kit. To install the HP 350 Mount Kit on a flat surface, see Installing the mount housing on a flat surface on page... - Page 4 5. (Optional) Remove the RJ-45 cable adapters from their bag, match the female connectors to the tracks at the upper corners of the mount housing as shown in Figure 2. The adapter is secured when it clicks into place. HP 350 AP Wall Mount Kit | Installation Guide...
- Page 5 Attaching the cable adapters Figure 2: HP 350 AP Wall Mount Kit | Installation Guide...
- Page 6 Installing the mount housing onto a wall box 1. Route the Ethernet cable from the wall box and through top-right opening in the back of the mount housing, as indicated in Figure 3. HP 350 AP Wall Mount Kit | Installation Guide...
- Page 7 Aligning the mount housing with a single wall box (left) or dual wall box Figure 4: (right) HP 350 AP Wall Mount Kit | Installation Guide...
- Page 8 1. Align the mounting bracket with the release button at the bottom, and then route the Ethernet cable through the top right opening of the mounting bracket. See Figure 5. Inserting the mounting bracket with routed Ethernet cable Figure 5: release button HP 350 AP Wall Mount Kit | Installation Guide...
- Page 9 1. Plug the Ethernet cable and optional power cord, if using, into the corresponding ports on the back of the HP 350. 2. Orient the HP 350 so the mounting pins are horizontal, and align with the slots on the mounting bracket. See Figure 6.
- Page 10 Installing the T8 Torx security screw 5. Insert the T8 Torx security screw into the hole at the bottom of the mount (to the right of the release button), and tighten. HP 350 AP Wall Mount Kit | Installation Guide...
- Page 11 © Copyright 2014 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.