Resetting the Main Unit
The following operations allow you to erase the settings stored in the main unit.
1
2 2
Resetting the Remote Control
The following operations allow you to erase the settings stored in the remote control.
VCR2
MULTI
STANDBY/ON
OPERATION
ENTER
STANDBY/ON
1
–
VOL
TV
CONTROL
FUNCTION
MASTER VOLUME
SYSTEM
+
OFF
MUTING
–
MUTING
RESET tab
1 While holding down the DIGITAL NR
button press the STANDBY/ON
button for about three seconds.
2 When you see RESET? appear in the
display, press the TONE – button.
OK? appears in the display, press
TONE +.
All the settings, including the speaker, surround sound
settings and tuner settings will be reset the unit to the
default settings.
1 Hold down both the
ON button and MUTING button and
then push the RESET tab under the
battery cover on the back of the
remote control.
2 Release the reset tab and then
release the two buttons.
If you don't release them in this order the settings
won't be cleared.
Using Other Functions
STANDBY/
79
En