Pioneer VSA-AX10 Operating Instructions Manual page 101

Symptom
Video
No image is output when an
input is selected.
After connecting the TV and
selecting the proper video
input, there is still no image.
There is no image coming
from the selected
component video jacks.
Can't record video.
Input/display
The display is dark.
You can't get DIGITAL to
come up when using the
SIGNAL SELECT button.
The digital format indicator
doesn't light up even when
playing a non-PCM digital
source.
A compressed digital source
is being played, but the
digital format indicators
don't light up.
During playback of a
compressed digital source,
the 2 PRO LOGIC or NEO:6
indicators show in the
display.
During playback of a
Surround EX or DTS ES
source on the AUTO setting,
the EX and ES indicators
won't light.
Cause
• Improper connections.
• The input source is not properly selected.
• The component video setting is
incorrect.
• The video input selected on the TV
monitor is incorrect.
• The type of cord connected to the TV
doesn't match your video input settings.
• You are trying to record a source
connected to the component video jacks.
• The source is copy protected.
• The DISPLAY DIMMER button is pushed.
• Either the digital connections or the
DIGITAL IN SELECT is incorrect.
• TAPE 2 MONITOR is on.
• MULTI CH IN mode is on.
• The player is paused or stopped.
• There is a mistake in the player settings
for audio output.
• Although it's a non-PCM digital source
there is a possibility the present track is not
the proper format (5.1, 6.1, or 7.1 channel).
• The digital signal is not being sent with
the source.
• The audio is in two channel format.
• It has already been Dolby surround
encoded.
• The source may be 6.1 playback
compatible, but there is no signal from the
source to indicate this.
Techno Tidbits & Problem-solving
Remedy
• Make sure the component is connected
correctly (see p.18-21).
• Press the correct function button.
• Select the correct C'NENT VIDEO IN
setting.
• Please read the TV monitor manual and
change the settings accordingly.
• Change the settings to match the cord
connected.
• Connect the source component to either
the composite video, or the S video jacks.
• You can't record sources that have been
copy protected.
• Press DISPLAY DIMMER on the remote
control repeatedly to return to the default
setting (see p.59).
• Make sure the digital connections and
the DIGITAL IN SELECT is done correctly.
• Press the TAPE 2 MONITOR button so it
goes into the off setting.
• Turn MULTI CH IN mode off.
• Play the source.
• Fix the audio settings (check the manual
that came with your DVD player).
• There is no problem. The indicator won't
light when the track is not a compressed
digital source.
• Choose DIGITAL or AUTO with the signal
select button.
• This is not a malfunction. Check the
manufacturer information for the source.
• Switch the LISTENING CH SELECT to
7.1 and switch to the THX Surround EX or
Standard TX listening mode.
101
En