Table of Contents
Advertisement
Before You Start
Checking the Supplied Accessories
Please check that you have received all of the following supplied accessories.
Remote Control Unit
"AA" IEC LR6
batteries x 4
Preparing the Remote Control
Loading the batteries
Load the batteries into the remote control as shown below. The remote control uses a lot of power due to the
LCD display so please use alkaline batteries. Depending on individual use you may have to change the batteries
fairly often but most users should be able to get an average of 1-3 months of battery life. When you notice a
decrease in the operating range or if the alarm sounds (see below), replace all batteries with new ones.
NOTE: After replacing the batteries, the touch panel will need re-adjusting (see p. 8-9).
1
CAUTION!
Incorrect use of batteries may result in such hazards as leakage and bursting. Observe the following precautions.
• Never use new and old batteries together.
• Insert the plus and minus sides of the batteries properly according to the marks in the battery case.
• Batteries with the same shape may have different voltages. Do not use different batteries together.
• When disposing of used batteries, please comply with governmental regulations or environmental public institution's
rules that apply in your country or area.
Remote Control Battery Alarm
When the batteries get too weak to operate the remote control properly an
alarm will sound and a warning screen will appear on the remote. Change the
batteries as shown above. This must be done within five minutes of the alarm
sounding or all your remote control settings will be cleared.
6
En
Touch Pen
(attached to the back
of the remote control)
Microphone
2
·
ª
ª
·
·
ª
ª
·
\
U-shaped connectors x 2
(attached to back of
)
amplifier
Cushion for
Remote x 4
"
AA" IEC LR6
3
batteries x 4
\
AC power cord
• Operating Instructions
Change Battery !!
OK ?
SIZE AA, LR6
SIZE AA, LR6
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
