Using Other Functions
Resetting the Main Unit
The following operations allow you to erase the settings stored in the main unit.
STANDBY/ON
Î
STANDBY
OFF
ON
INPUT SELECTOR
1
Resetting the Remote Control
The following operations allow you to erase the settings stored in the remote control.
VCR2
STANDBY/ON
ENTER
STANDBY/ON
84
En
AUDIO/VIDEO MULTI-CHANNEL AMPLIFIER
LISTENING MODE SELECTOR
PUSH ENTER
VIDEO
AUDIO
MASTER VOLUME
1
2 2
–
VOL
TV
CONTROL
FUNCTION
MASTER VOLUME
MULTI
SYSTEM
+
OPERATION
OFF
MUTING
–
MUTING
RESET tab
1 From the Standby mode, and while
VSA-AX10i
holding down the DIGITAL NR
button press the STANDBY/ON
button for about three seconds.
2 When you see RESET? appear in the
display, press the TONE – button.
OK? appears in the display, press
TONE +.
memo
All the settings, including the speaker, surround
sound settings and tuner settings will be reset to
the default settings.
1 Hold down both the
ON button and MUTING button and
then push the RESET tab under the
battery cover on the back of the
remote control.
2 Release the reset tab and then
release the two buttons.
If you don't release them in this order the settings
won't be cleared.
memo
All the settings will be reset to the default set-
tings.
STANDBY/