Pioneer VSA-AX10 Operating Instructions Manual page 39

Audio/video multi-channel amplifier
Hide thumbs Also See for VSA-AX10:
Table of Contents

Advertisement

1
ENTER
5˜∞ buttons
2.Surround Setup
[ Check ]
[
1.Speaker Systems
[ 2.Channel Delay ]
[ 3.Channel Level ]
[ 4.Acoustic Cal EQ ]
[Return]
2
2.1. Speaker Systems
[Manual
Free]
[Manual THX]
(all small)
[Auto]
[Return]
3,4
2.1. Speaker Systems
Manual Free
Speaker System Select
[
Normal Surround
( Next)
5
2.1. Speaker Systems
Manual Free
" Normal Surround "
Front
[LARGE]
Center
[LARGE]
Surround
[LARGE]
SurrBack
[LARGE
Subwoofer
[ YES
( NEXT)
7
2.1. Speaker Systems
Manual Free
" Normal Surround "
Front
[LARGE]
Center
[LARGE]
Surround
[LARGE]
SurrBack
[LARGE
Subwoofer
[
YES
( NEXT)
1 SPEAKER SYSTEMS should be
selected. If it isn't use the 5∞ buttons
STANDBY/O
to select it. Press the ENTER button.
The setup possibilities appear on your TV.
2 Use the 5∞ buttons to select the
speaker system setting.
Choose from:
MANUAL FREE: Sets all the speakers
MANUAL THX: All speakers are set to SMALL. You can
]
select the number of surround back speakers.
AUTO: All speakers are set automatically. (The micro-
phone must be hooked up to the front panel in order to
use this setting.)
For MANUAL FREE, select it and press ENTER. Then go
to step 3.
For MANUAL THX, select it and press ENTER. Then go
to step 3.
For AUTO, select it and press ENTER. Be prepared for
loud test tones and make sure the room is free of ambient
noise (see memo page 16). When you see OK on the OSD
the setup is finished. Go to step 9.
3 Use the 2 3 buttons to select either
NORMAL SURROUND or FRONT BI-
AMP (5.1).
NORMAL SURROUND: For normal home theater use
]
FRONT BI-AMP (5.1): Settings for bi-amp (see p.67).
4 Use the ∞ button to go to the next
screen.
5 With the 5∞ buttons choose the set of
speakers that you want to set.
If you selected MANUAL THX in step 2 set all speakers,
2]
X
]
except for surround back, to SMALL.
6 Use the 2 3 buttons to choose the size
and number for each set of speakers as
well as LARGE, SMALL, YES, NO or
PLUS.
2 ]
X
7 Repeat steps 5 & 6 for all speakers
]
channels.
Setting Up for Surround Sound
39
En

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents