System Off - Pioneer VSA-AX10 Operating Instructions Manual

Using Other Functions

System off

The SYSTEM OFF feature allows you to tell the amplifier and your other components to stop and turn off with
the push of only one button on the LCD commander (this feature will only work with components that have
a standby mode). For example, you can program the unit to stop your DVD, turn off your TV, turn off your DVD
player and turn off the amplifier itself. You don't need to program in other the power for PIONEER components,
they will go off automatically in this mode. The amplifier itself will go off automatically as well.
The steps below show you how to program a string of up to 5 different SYSTEM OFF operations based on eight
possible components.
• Be sure to recall or learn the remote commands for each component before attempting multi
memo
operations (see "Setting Up the Remote Control to Control Other Components", p.60-63).
• Press the BACK button any time to go back a screen.
• Press the REMOTE SETUP button any time to cancel the process.
Remote Setup
AMP
LCD
COMMANDER
DVD/LD
VCR1 PRESET RECALL
/DVR
VCR2
LEARNING
VCR3
2
MULTI OPERATION
TV
3
Multi Operation
AMP
DVD/LD
VCR1
/DVR
VCR2
VCR3
TV
4

System OFF

AMP
DVD/LD
1
VCR1
/DVR
VCR2
4
VCR3
TV
5
System OFF
AMP
DVD/LD
1
VCR1
/DVR
VCR2
4
VCR3
TV
74
En
1
REMOTE
BACK
SETUP
CD
DIRECT FUNCTION
CD-R/
TAPE1
ITEM MEMO
TUNER
VIDEO
KEY LABEL
SAT
TV
CONTROL
BACK REMOTE
SETUP
CD
CD-R/
TAPE1
TUNER
SELECT FUNCTION
VIDEO
SAT
TV
CONTROL
REMOTE
BACK
SETUP
SELECT NUMBER CD
CD-R/
TAPE1
2 3
TUNER
VIDEO
CLEAR
5
SAT
SETUP
TV
OK
CONTROL
REMOTE
BACK
SETUP
SELECT NUMBER CD
CD-R/
2 TAPE1
3
TUNER
VIDEO
CLEAR
5
SAT
SETUP
TV
OK
CONTROL
1 Press the REMOTE SETUP button.
2 Press the MULTI OPERATION
button.
The next screen will instruct you to SELECT
FUNCTION.
3 Press the AMP button.
The SYSTEM OFF screen appears.
4 Select the command number you
want the process to start with. Of
course it's logical to start with 1 so
press command 1 button (the box
the 1 with inside it).
This tells the amplifier this will be the first command.
The number will become shaded.
5 Select the FUNCTION button of the
component which you want to stop
or turn off (for example, your DVD
player) and press the function
button for it.
The screen for that component will appear in the LCD
display.