Expert Setup - Pioneer VSA-AX10 Operating Instructions Manual

Advanced Setup

Expert Setup

These settings are more advanced. Some could add depth or listenability to your sound (like the Dynamic Range
Control) and others are for your convenience (like the Function Rename). You can decide if you want to make
these settings or not. They are not crucial to good surround sound. You only need to make these settings once
(unless you change the placement of your current speaker system, add new speakers or components to your
system, etc.). These setup operations use your TV to display the settings and choices so be sure your TV and
amplifier are properly hooked up.
1
Amplifier
AMP
LIGHT
DVD/LD
STEREO
/DIRECT
VCR1
/DVR
VCR2
VCR3
MIDNIGHT
TV
STANDBY/ON
ENTER
Amplifier
AMP
TONE
DVD/LD
VCR1
DISPLAY
/DVR
DIMMER
VCR2
STATUS
VCR3
SYSTEM
TV SETUP
3
4
System Setup
[Auto Surround Setup]
[1. Input Assign ]
[2. Surround Setup ]

[3. Expert Setup

[4. THX Audio Setup ]
[Exit]
5
3.Expert Setup
[1. OSD Adjustment
[2. Bass Peak Level]
[3. D-Range Control]
[4. Multi-Ch In Select]
[5. Function Rename]
g]
[Return]
82
En
2
use lock
TV
CONTROL
MAIN SUB REMOTE
SETUP
LISTENING MODE
CD
FUNCTION
(DVD-A
SURROUND
/SACD)
CD-R/
+
TAPE1 CH
MULTI CH
THX STANDARD
IN
–
TUNER
CH
ADVANCED ADVANCED LISTENING
+
VIDEO VOL
CINEMA CONCERT CH SEL.
–
SAT VOL
ACOUSTIC
DIGITAL
TV
CAL.
NR
CONTROL FUNCTION
MASTER VOLUME
MULTI SYSTEM +
OPERATION OFF MUTING
–
MAIN SUB REMOTE
SETUP
BASS/ CD
ATREBLE
CD-R/
TAPE1
EFFECT/
CH SEL.
VIDEO TUNER
SELECT
VIDEO
SPEAKER INPUT
LOUDNESS
A/B ATT.
SAT
TAPE 2 SIGNAL
TV
MONITOR
SELECT
CONTROL
]
]
1 Turn on the amplifier and your TV,
press the AMP on the remote
control.
Make sure your TV is set to the amplifier.
2 Press the SUB button on the
amplifier screen.
3 Press the SYSTEM SETUP button.
The menu possibilities appear on your TV.
4 Select EXPERT SETUP with the 5∞
buttons. Press the ENTER button.
5 Follow the order below to make
advance settings. Use the 5∞
buttons to navigate through the
menus. When you have the setting
you want in particular menu, press
ENTER.
In each mode, the current settings are displayed
automatically.
OSD (SCREEN DISPLAY) ADJUSTMENT (p.83)
This feature allows you to adjust positioning of the
display to fit your TV better.
BASS PEAK LEVEL (p.84)
Dolby Digital, MPEG and DTS audio sources include
ultra-low bass tones. Set the bass peak level as
needed to prevent the ultra-low bass tones from
distorting the sound from the speakers.
DYNAMIC RANGE CONTROL (p.85)
This feature makes possible excellent surround sound
effects when listening to Dolby Digital sources at low
volumes.
MULTI CH IN SELECT (p.86)
This feature is for choosing an output method for
people who have connected their DVD player up with
multi channel analog inputs.
FUNCTION RENAME (p.87)
This feature allows you to change the names that
appear on your amplifier's display to suit your home
system in a customized way.