Use Your Pump; Before Using The Pump; To Begin Pumping - Philips AVENT SCF902 User Manual

6

Use your pump

Before using the pump

• Wash your hands thoroughly, and
make sure your breasts are clean.
Gently squeeze a little milk from
each nipple to make sure that milk
ducts are not blocked.
• Make sure you follow the steps in
"Clean and sterilze" and "Assemble"
chapters to clean, sterilze, and
assemble the breast pump.
• Relax in a comfortable chair, leaning
slightly forward (use cushions to
support your back). Make sure that
you have a glass of water nearby.

To begin pumping

1
Press the funnel and the Let-down
massage cushion of the pump firmly
against your breast. Make sure that
no air escape; otherwise there is no
suction.
1
2
Press the on/off button
on your pump.
» The breast pump automatically starts
up with the lowest level to gently
9 EN
stimulate, and the left light on the
pump motor will illuminate. You begin
to feel the suction on your breast.
2
3
Once your milk starts flowing, you
can press suction increase button
or suction decrease button
adjust and find your exact comfort
level.
• Press the suction increase button
to deeper the suction.
• Press the suction decrease button
to lower the suction.
» There are altogether five modes.
The number of lights will increase or
decrease according to the vacuum
mode selected.
3
to switch
to