Table of Contents
Advertisement
6
To make the bottle stands stable,
insert it into the stand.
6
Note
•
To prevent toppling, insert the bottle into
the stand after each use.
7
Connect the silicone tube to the cap
and the motor firmly.
7
8
Connect the power adapter to the
pump motor, and then insert the
power plug to the power socket.
8
Tip
•
For battery operation, open the rear cover
of the motor unit in the direction indicated
by the marks. Insert four new 1.5V AA
alkaline batteries into the battery housing.
Reattach the rear cover to the motor unit.
Note
•
A new set of batteries provides up to
2.5 - 3 hours of operation. If you have
inserted batteries in the battery housing of
the motor unit and plug in the adapter, the
breast pump will run from the main power
supply. The batteries cannot be charged in
the unit.
EN
8
Advertisement
Table of Contents
