Jøtul GF 305 DV IPI Installation And Operation Instructions Manual page 35

Room Thermostat (Transmitter Operation)
The Remote Control can operate as a room thermostat.
The thermostat can be set to a desired temperature to
control the comfort level in a room.
To activate this function, press the Thermostat Key. The

display will indicate that the room thermostat is "ON"
and the current Set Temperature is now displayed. Fig.
15.11.
To adjust the Set Temperature, press the Up or Down

Arrow Keys until the desired Set Temperature is dis-
played. Fig. 15.12.
SMART Thermostat Function
This function adjusts the flame intensity according to the
difference in the Set Point temperature and the actual
room temperature. As the room temperature gets closer
to the Set Point, the Smart Function will modulate flame
intensity down.
To activate this function, press the Thermostat Key

until the word "SMART" appears to the right of the
thermometer bulb icon. Fig. 15.13.
To adjust the temperature, press the Up or Down Arrow Keys

until the desired Set Temperature is displayed. Fig.15.14.
Fan Control
The fan speed can be adjusted through six settings.
To activate this function, press the Mode Key to index
to the Fan Control icon. See fig. 15.15. The fan will not
function at all if it is not first set to ON.
Use the Up/Down Arrow Keys to turn ON, OFF, or

adjust the fan speed. Fig. 15.16. A single "beep" will
confirm reception of the command. After a 5 minute
interval, the fan will power up to its highest speed
and then modulate down to the established fan speed
setting. The fan will continue to operate for 12 minutes
after the burner is turned off. Manual speed control is
not available when the SMART Thermostat is ON.
Accent Lamp Control
With the Remote ON, press the Mode Key to index to

the Lamp icon. Figs. 15.17.
Pressing the Up Arrow Key will turn the Lamp ON. Press

the arrow keys to adjust the brightness. Fig. 15.18.
Pressing the Down Arrow Key will turn the Lamp OFF.

Child Safety Lock
This function will lockout the Transmitter to prevent un-
supervised operation.
To activate the Lock, press the Mode key and UP Key at

the same time. Fig. 15.19.
To de-activate the Lock, press the Mode Key and UP Key

at the same time.
Set Temperature
Fig. 15.11. Thermostat ON.
Fig. 15.13. Smart Mode
Fig. 15.15. Fan Mode.
Fig. 15.17. Lamp Control.
Fig. 15.19. Lock ON.
139843_A GF 305 DV IPI 8/17
Room Temperature
Fig. 15.12. Change Set
Temperature.
Fig. 15.14. Smart Set Temp.
Fig. 15.16. Fan Speed.
Fig. 15.18. Lamp ON.
Fig. 15.20. Low Battery.
See page 37.
35